Submersible Flood Restoration Drainage Pump - with 10 m Power Lead

Ashbys Submersible Floor Restoration Drainage Pump is the experts solution to flooded buildings and areas. It’s ability to pump water down to 1 mm makes it suitable for pumping large or small areas of nuisance water found on flat surfaces. Comes complete with 60 cm long Output Hose ready to connect to a standard 38 mm / 1-1/2 inch Vacuum Hose for Enforcer, Ninja, Sensei etc or see Pump-out Hose 
For improved durability, during robust handling, it has a pressed steel outer casing and a cast aluminium pump stand to offer increased protection of the steel and rubber base plate. A combination of a rubber pump chamber and a urethane vortex impeller enables the design to offer excellent wear resistance in site water applications that contain sand and silt in suspension, thus maintaining performance and reliability.

An additional feature is an integral swing check valve to prevent back flow of water from the discharge hose. Quality is further enhanced with a 403 stainless steel shaft that is fitted with an ultra hardwearing, silicon carbide, double mechanical seal (in an oil chamber), and an oil lifter to maintain seal lubrication during operation in any position. This feature, combined with the water and air cooling route to the top outlet, allows the pump to operate for extended periods with little or no water. Used widely by flood restoration specialists. Supplied with 10 metres of heavy duty, H07RN-F rubber power cable and standard UK 3 pin plug.

Features & Specification 

• 10 m heavy duty Power Lead
• Ready to connect to 38 mm / 1-1/2 inch standard Vacuum Hose for Enforcer, Ninja, Sensei etc or see Pump-out Hose PC7757 & PC7758 in Related Items
• Working Head Height – will pump up to 11 m high
• Working Distance – will easily operate 20 m / 65 ft or further, varying with working head height, bends / kinks in Pump-out Hose etc
• Working Head Height – will pump up to 11 m high
• Flow-rate – 170 Ltr per minute
• Free Passage – will handle up to 6 mm suspended soft solids
• Weight – 12 Kg

Product Reviews

There are currently no reviews for this product. Be the first to write a review.