
Ashbys Spot Master professional spotting & vehicle valeting machine
- our upgraded version
Designed for professional small area carpet cleaning, vehicle valeting plus spot and stain removal on carpets, upholstery and rugs. Just 9 Kg dry weight and as portable as a briefcase! We’ve upgraded both the quality and features of this unit, to separate it from all other spot and stain removal machines in its class.
How it works
Ashbys Spot Master works using the rinse extraction method of cleaning – the proven most thorough and hygienic method available. Simply fill the solution tank on the Spot Master with a mixture of fresh water and cleaning detergent. Cleaning solution is spray injected (via the Spot Masters hand tool) into the soiled fibres, then immediately sucked out into the Spot Masters recovery tank.
Applying ANY cleaning detergent without rinse extraction always leaves a residue and will rapidly re-soil, as the detergent left in the fibres attracts dirt like a magnet. That is why this rinse-clean system, gives complete hygiene and total soil removal.
All good cleaning systems involve rinse extraction – Ashbys Spot Master is the ultimate in light, portable rinse extraction equipment.
Whats included
1 x Upgraded Spot Master / SpotMaster Spotting Machine Package with -
- 1 x Upgraded 12-1/2 ft / 3.81 m Crush-resist Smooth-bore Vacuum Hose Set - attached to the hand tool listed directly below.
- 1 x Upgraded Stainless Steel Hand Tool - 9 cm wide vacuum slot fitted with low friction glides for easy-use, clear headed to monitor soil extraction, external spray jet with high-quality stainless steel tip plus heavy duty brass valve fitted with stainless steel trigger.
- 1 x Instruction Manual
Why this professional spotting / stain remover package is different?
Upgraded machine
The vacuum motor of most spotting machines, no matter how similar they look – are NOT protected by a high level safety shut-off system that actually works. Without an effective high level safety shut-off and air-flow baffling system, dirty water is drawn in to the vacuum motor making it fail prematurely.
- Ashbys have installed a high-level safety shut-off which will stop the vacuum when the recovery / dirty water tank is full – very important if you intend to use this machine to clean small areas of carpet or upholstery.
- Ashbys have also effectively baffled the air-flow, to prevent spray being drawn into the vacuum motor.
Upgraded hand tool…
We’ve selected our best-selling hand tool from our Stainless Steel Hand Tool range for extended life. Features include –
- 500 psi rated heavy duty brass valve.
- Premium quality stainless steel tipped jet.
- Rugged see-through 9 cm wide cleaning head with low-friction stainless steel glides, making it easier to use.
- 38 mm / 1-1/2 inch stainless steel vacuum tube.
- Robust metal valve clamp - not plastic, which will fracture with use.
Upgraded, longer hose set…
- 12-1/2 ft / 3.81 m long – allowing you to effectively use the Ashbys Spot Master for small area carpet cleans, upholstery cleaning and cleaning demos.
- Crush-resistant, smooth-bore premium quality heavy duty vacuum hose.
- Lightweight premium quality grey chemical resistant solution hose.
Uses include
- Spot and stain removal on carpets and upholstery – ideal for use in hospitals, nursing homes and childcare establishments, where a fast removal of health-threatening spillages is essential.
- Small area carpet cleaning.
- Upholstery cleaning.
- Vehicle valeting.
- Demonstrating the hot water extraction method of carpet cleaning to potential customers – this unit is light, portable and quick and easy to set-up.
Specification
- Vacuum Motor – 2 stage vacuum motor producing 89 inches of water lift / 6.5 inches of mercury lift - protected via a high level shut-off and air-flow baffle system.
- Water Pump – 60 psi. Hose Set Length - 12-1/2 ft / 3.81 m.
- Power Lead Length - 25 ft / 7.6 m.
- Wheels - Non-marking.
- Tank Construction - Tough polyethelene.
Weight & Dimensions
- Weight – 9 Kg.
- Length – 21 inches / 53 cm.
- Width – 10 inches / 25 cm.
Prefer to speak to an Advisor?
For information and advice on getting the right machine package to suit your requirements,
call:
01795 436999
Monday - Friday: 08:00 - 16:30