|
Highly Recommended!
What Cleanco say
The Cleanco Cruiser is built for the professional carpet and upholstery cleaner who demands a lot out of their equipment for residential and commercial cleaning. The Cruiser is also able to handle flood restoration extraction.
Package includes
- Cruiser unit with tools and hoses as detailed below
- Full professional installation by Ashbys Cleaning Equipment
- Protecta Cote lining to floor of van
- Supplied fitted and ready to run in your vehicle
- Full hand-over and instruction on use / operation
Engine / Power Pack
Powerful 25 HP Kholer Liquid-cooled engine 2850 RPM
Vacuum Blower
Sutorbilt TriLob T406 14" Hg
High Pressure Pump
Cat 3CP plunger pump 1000 PSI 3.7 GPM
Recovery Tank
60 gallon marine aluminium with a powder coated finish, lift out lint basket
Fresh Water / Solution Tank
400 Ltr with high level safety cut-off
Robust securing frame
Demand Pump System - gas assisted high flow-rate pump.
Battery
Supplied.
Chemical Pump
Stainless steel providing durability and prevents corrosion with last step chemical injection chemical metering system
Cleaning Wand
12" Stainless steel 2 Jet Wand - fitted with 110 015 jets
Hose Sets & Joining Tubes
2 x 50 ft V2 Fully Sleeved Heavy Duty Hose Set – 2 inch
1 x Joining Tube – 2 inch to 2 inch
1 x 25 ft V2 Fully Sleeved Heavy Duty Hose Set – 1-1/2 inch with Pressure Shut-off Valve (allowing you to easy change tools without switching off the pump)
1 x Joining Tube – 2 inch to 1-1/2 inch
Approx Weight for Above Package
550 Kgs for Cruisers and Recovery Tank
400 Kgs for Fresh Water / Solution Tank when full.
Van Requirements
We would recommend fitting into a long wheel base van with a 3500 Kg gross weight and 1650 Kg pay load (for example Fiat Ducato or Mercedes Sprinter).
Control Panel
Recovery tank full indicator light
Engine high temperature shut-down indicator
Vacuum gauge
Solution water pressure gauge
Solution water temperature gauge
Circuit breakers
Hour meter
Chemical flow meter
Chemical prime & meter valve
Adjustable pressure regulator
Solution outlet quick disconnect
Blower lube port
Key ignition start
Any questions and to discuss your requirements
please call either Derek or Martin on 01795 436999
Click Here to Download a Brochure
Click Here to Download an Instruction Manual
|