Kleenrite Upholstery Tool

Superior professional upholstery tool, capable of both water and solvent cleaning. Our recommended upholstery tool for use with Ashbys Ninja or Sensei fitted with Ashbys Built-in Hot Solvent Cleaning System.

Features include

• 3 inch / 8 cm wide swivel head.
• Comfort trigger.
• Anti-grab vacuum slot.
• Stainless steel jet (enclosed to prevent over-spray) and internal high pressure heat insulated solution hose.
• Connections 6ft / 1.8m back from cleaning head to prevent water connectors damaging the item being cleaned.

Our premiere hand tool for upholstery and rug cleaning.

Available in two versions

Both versions look identical, but the valve stems are made from either Viton or Teflon, depending on the pressure and temperature at which they are to be used.

• PC3012 (Viton Stem version) -
• Water pumps up to 135 psi.
• Temperatures up to 70 deg C.
• Hot Solvent Cleaning Adaption.
• PC6921 (Teflon Stem version) -
• Water pumps up to 400 psi.
• Temperatures up to 110 deg C (ie - V2 SteamMate heating systems etc).
• Hot Solvent Cleaning Adaption - however, you may experience a slight drip from the jet, as Teflon seals are designed for higher pressures / temperatures and do not always seal perfectly at lower pressures.
  If you do a lot of Hot Solvent Cleaning and require a perfect seal, select PC3012 and do not use at pressures above 135 psi or temperatures in excess of 70 deg C.

Click Here to Download a larger picture
Click Here to Download an Exploded Parts Diagram