Product Description & Directions For Use
Fluoroseal Plus is a high quality professional carpet protector incorporating Dupont fluoropolymer and a special stain block additive which helps prevent soiling and staining. Fluoroseal Plus is suitable for use on most carpets, subject to proper pre-testing and assessment. Fluoroseal Plus is ready-to-use for all carpet types. Apply at full strength. Do not dilute with water. Do not use on jute, sisal, coir matting or other water sensitive fibres.
Before proceeding with application, treat a small inconspicuous section of the carpet with Fluoroseal Plus and allow to dry completely. Check acceptance of water repellency and any change in colour, shade or texture with customer before proceeding with application.
Soiled carpet - Thoroughly vacuum, then clean with hot water extraction method. Ensure that alkaline cleaning residues are neutralised by spraying or extraction rinsing with B109 Fibre & Fabric Rinse.
New carpet - Thoroughly vacuum, then lightly dampen carpet by spraying with a solution of B109 Fibre & Fabric Rinse at 10ml per litre of water. Apply Fluoroseal to carpet using a Prochem pressure sprayer fitted with 8004 fan spray tip at the rate of 30 to 50 m² per 5 litres, depending on carpet density. Spray with a light even stroke at low to medium pressure, then repeat in a crossing pattern until correct amount of solution has been applied. Brush product into carpet with a Prochem pile brush, replace furniture on protector pads and allow carpet to dry before re-use.
Do not allow product to freeze. Flush equipment with water after use. Wipe overspray immediately from wood, glass, metal and other surfaces.
