Twin (Dual) In-series Vacuum Systems

Listed in order of performance, highest first.

• 5.7 inch Standard 3 Stage plus 5.7 inch Heavy Duty Vacuum System PC5866
  - 230 inches of water lift / 17 inches of mercury lift. Will operate up to 200 ft / 61 metres of vacuum hose.
• 2 x 5.7 inch Heavy Duty Value Vacuum System PC7296
   - 230 inches of water lift / 17 inches of mercury lift. Will operate up to 200 ft / 61 metres of vacuum hose.
• 2 x 5.7 inch Standard 3 Stage Vacuum System PC2005
  - 220 inches of water lift / 16.2 inches of mercury lift. Will operate up to 175 ft / 53.3 metres of vacuum hose. 

Water Pump Systems

• 400 psi Induction Motor & EnduraGuard™ Coated Head Pump with Pressure Gauge plus Flow-rate & Pressure Control System PC7677
  - 600 psi capable pump, limited to 400 psi for maximum life-span. Features a heavy duty non-maintenance induction motor. Will operate up to 400 ft / 122 metres of solution hose.
• 135 psi High Flow-rate Induction Motor Pump with Flow-rate Control System PC6649
  - gives an extra 35% more flow-rate with a performance level similar to that of a 200 psi pump. Features a heavy duty non-maintenance induction motor. Will operate up to 200 ft / 61 metres of solution hose. 
• 135 psi High Flow-rate Standard Motor Pump with Flow-rate Control System PC7297
  - gives an extra 35% more flow-rate with a performance level similar to that of a 200 psi pump. Features a standard carbon brush motor. Will operate up to 200 ft / 61 metres of solution hose.
• 135 psi High Flow-rate Standard Motor Pump System PC7824
  - gives an extra 35% more flow-rate with a performance level similar to that of a 200 psi pump. Features a standard carbon brush motor. Will operate up to 200 ft / 61 metres of solution hose.
• 135 psi Standard Flow-rate Induction Motor Pump with Flow-rate Control System PC6648
  - features a heavy duty non-maintenance induction motor. Will operate up to 100 ft / 30.5 metres of solution hose.

Heater Systems

• Built-in 3 Kw V2 SteamMate PC2017
  - the most powerful heating system available from Ashbys Cleaning Equipment, the home of steam-boosted carpet cleaning. Positioned after the pump, giving constant heat, with fully adjustable temperature control from 0-110ºC. This in-line heat exchanger provides instant steamboosted carpet cleaning for faster, more thorough results with the lowest possible drying times.
• Built-in 3 Kw Immersion Heater System with Low Level Safety Cut-Off PC6786
  - positioned in the solution (clean water) tank and designed for use with 400 & 600 psi machine builds. 3 Kw power with fully adjustable temperature from 0-60ºC and protected via a safety cut-off, which automatically switches off the system when cleaning solution level is low.
• Built-in 3 Kw Immersion Heater System with Low Level Safety Cut-Off PC2007
  - positioned in the solution (clean water) tank and designed for use with 135 psi machine builds. 3 Kw power with fully adjustable temperature from 0-70ºC and protected via a safety cut-off, which automatically switches off the system when cleaning solution level is low.

Specialist Systems

• Built-in Auto-fill System PC2002A
  – automatically tops-up solution tank with clean water whilst working, for continuous operation. Ready to accept a water supply hose fitted with a standard Hozelock female connector from a pressurised source (ie - indoor / outdoor tap or in-vehicle water tank with supply pump).
• Built-in Auto-fill with Liquid Detergent Metering System PC2002B
  - automatically tops-up solution tank with clean water and liquid cleaning detergent mixture whilst working, for continuous operation. Connect the supplied intake hose to liquid detergent and Ninja. Connect your water supply hose to water source and Ninja. Set your preferred cleaning solution strength in PPM (parts per million) on the fitted chemical meter and start cleaning. System is ready to accept a water supply hose fitted with a standard Hozelock female connector from a pressurised source (ie - indoor / outdoor tap or in-vehicle water tank with supply pump).
• Remote Control On / Off System PC7716
  – switches Ninja on and off at the touch of a button on your remote control, allowing the operator to change tools and activates Gravity Autodrain System PC7715 if fitted, to automatic empty the recovery tank. Combine these two systems with Built-in Auto-fill System for massive time savings. Works through walls and on multi-floor levels, with up to 30 m range.
• Gravity Auto-drain with 25 ft / 7.6 m Large Bore Drainage Hose System PC7715
  - filter free, adds no weight to machine build and easy to install as and when required. Simply remove standard dump valve spout, connect Gravity Auto-drain with Drainage Hose, open dump valve and start cleaning. System empties recovery tank automatically when the Ninjas vacuum system is not running. Supplied with large bore 1-1/2 inch / 38 mm diameter drainage hose.
• Built-in Pump-driven Auto-drain with 25 ft / 7.6 m Large Bore Drainage Hose System PC2003
  – filter free. Pumps out recovery tank automatically whilst working via a large bore 1-1/2 inch / 38 mm diameter drainage hose. Requires no operator attention once activated. This system has the ability to pump out waste water up-hill - making it the ideal choice for flood restoration specialists.
• Built-in Hot Recirculating Solvent Cleaning System PC7821
  - adds the ability to hot solvent clean dry-clean only items like curtains, upholstery, rugs, tapestries, wall coverings etc as well as clean carpets, upholstery and rugs using the normal hot water extraction process. Our superior system is unique because it draws solvent cleaning detergent as required, direct from the container with no need to fill solution tank - no wasted solvent detergent and no cross-contamination between water and solvent cleaning systems. The recirculating system maintains solvent detergent temperature, keeping it hot right up to the tool head. No other system does this - and it's important because heat cleans better. Supplied with accessory kit including curtain cleaning tool.
• Built-in Direct Solution Pump Feed System PC7817
  - enables the Ninja to take cleaning solution direct from a supply tank, without the need for a transfer pump. Ready to connect to a standard 1/4 inch brass self-sealing female water connector. The perfect system for van / truck-mounting your Ninja.
• Splash Resistant Power Brush Socket PC2004
  - connect your Ashbys Metal Power Brush or Rotovac 360i directly to your Ninja via a UK 3 pin splash resistant plug socket.