Ashbys 25% Metallised Solids Hard Floor Polish 5 Ltr

Extremely durable high solids polish for use on vinyl, rubber, thermoplastic, asphalt, terrazzo, sealed wood, sealed cork and sealed concrete floors. Excellent results can be obtained using high speed burnishing techniques. A hard wearing and scruff resistant polish giving a slip retardant, high gloss finish.

Coverage

The estimated coverage is 300-400m2 per 5 litres.

Directions

• Thoroughly clean floor & allow to dry before applying polish.
• If the old polish has been stripped, the floor may require neutralising with dilute acetic acid (vinegar) – 2 tablespoons per 5 ltr.
• Apply two thin coats with clean mop or applicator.
• Allow each coat to dry thoroughly – approx 30 minutes depending upon humidity and weather conditions.
• A third coat may be necessary on old, worn or heavy traffic areas.
• For a period of 24 hours after applications, the floor surface should only be swept or damp mopped.

Maintenance

Routine maintenance should be carried out as recommended:

• Damp mop, using Ashbys Floor Maintainer PC4424 allow to dry then dry burnishing or
• Remove dust by mop sweeping and spray clean using Ashbys Floor Maintainer PC4424.

Product Reviews

There are currently no reviews for this product. Be the first to write a review.